TapeTech Drywall Taping Tools by Ames Tools 3.5" EasyRoll™ Angle Head features smooth rolling rubber tire wheels that reduce drag. Tape Tech Easy Roll angle head, also known as corner finishers or glazers, have spring adjusters that allow quick choice of spring tensions to suit any drywall finishing project. 3.5" EasyRoll angle head is designed to feather joint compound evenly on both sides of angle during taping coat and will also attach to angle box or Mudrunner for applying smooth final finish coat.
EasyRoll angle heads by TapeTech Taping Tools are designed with wheels to reduce friction when using the angle head to glaze tape corners after applying with automatic taper or banjo. Easy Roll can also be attached to angle box (also known as corner box, flusher box or hockey box) to apply smooth, evenly feathered final finish coat to inside drywall angles. Handy lever spring adjusters allow quick preferred setting of spring tension. Frequently the softer setting is used when applying tape and firmer setting is used when doing final angle finish.
3.5" EasyRoll angle head is excellent choice for applying final finish mud to inside 90° drywall corner angles
Rubber tire wheels reduce friction for easier operation than traditional angle heads.
Lever adjusters allow desired setting of spring tension for best glazing results.
Spring action allows EasyRoll angle heads to compensate for angles that are slightly over or under 90°
Smooths and feathers both sides of drywall angles at the same time.
Patented locking retainer clip eliminates damaging disconnects from angle head handle or angle box.